background image

461880   V2.2   8/09 

12

 

Product specifications subject to change without notice 

For the latest version of this User Guide, Software updates, and other 

up-to-the-minute product information, visit our website: www.extech.com 

Extech Instruments Corporation, 285 Bear Hill Road, Waltham, MA 02451 

Warranty 

EXTECH INSTRUMENTS CORPORATION

 

(A FLIR COMPANY)

 

warrants this instrument to 

be free of defects in parts and workmanship for 

one year

 from date of shipment (a six 

month limited warranty applies to sensors and cables). If it should become necessary to 
return the instrument for service during or beyond the warranty period, contact the 
Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our 
website www.extech.com for contact information. A Return Authorization (RA) number 
must be issued before any product is returned to Extech. The sender is responsible for 
shipping charges, freight, insurance and proper packaging to prevent damage in transit. 
This warranty does not apply to defects resulting from action of the user such as misuse, 
improper wiring, operation outside of specification, improper maintenance or repair, or 
unauthorized modification. Extech specifically disclaims any implied warranties or 
merchantability or fitness for a specific purpose and will not be liable for any direct, indirect, 
incidental or consequential damages. Extech's total liability is limited to repair or 
replacement of the product. The warranty set forth above is inclusive and no other 
warranty, whether written or oral, is expressed or implied. 

Calibration and Repair Services 

Extech offers repair and calibration services

 for the products we sell. Extech also 

provides NIST certification for most products. Call the Customer Care Department for 
information on calibration services available for this product. Extech recommends that 
annual calibrations be performed to verify meter performance and accuracy. 

Copyright 

©

 2009 Extech Instruments Corporation (a FLIR company) 

All rights reserved including the right of reproduction in whole or in part in any form. 

+7 727 390 3426

+7 705 262 6212

www.bigfoottrade.kz

Содержание 461880













Отзывы: