461880 V2.2 8/09
4
Vibration Meter Operation
Connecting Probe
1. Note that this meter accepts only the supplied vibration probe.
2. Plug the BNC connector end of the probe cable onto the BNC connector at the top of
the meter.
3. The probe can then be connected to the tested machinery in three ways:
a. Attach the magnetic end of the probe to a ferrous material on the equipment under
test.
b. Manually hold the probe in place against the equipment under test.
c. Unscrew the magnet from the probe end and use the threaded mount to connect to
a screw, bolt, or stud on the equipment under test.
www.bigfoottrade.kz
