background image

461880   V2.2   8/09 

Introduction 

Congratulations on your purchase of the Extech 461880 Vibration Meter and 
Combination Laser Tachometer. The 461880 Vibration functions have a frequency 
sensitivity that meets ISO-2954, and measure Acceleration, Velocity and Displacement.  
A 1000 point datalogger allows recording of data for download to a pc with included 
software. The Tachometer functions provide contact RPM and Linear Surface Speed, as 
well as non-contact RPM measurements. The 461880 is shipped fully tested and 
calibrated and, with proper use and care, will provide years of reliable service. 

Features 

Vibration Function Features:

 

Measures Acceleration from 0.5 to 199.9 m/s

2  

, 0.05 to 20.39 G or 2 to 656 ft/s

2

Measures Velocity from 0.5 to 199.9mm/s , 0.05 to 19.99 cm/s or 0.02 to 7.87
in/s

Measures Displacement from 0.005 to 1.999 mm or 0.002 to 0.078 inches

RMS measurements for Acceleration and Velocity

Peak to Peak measurements for Displacement

Peak function for Acceleration and Velocity

Max Hold function for Acceleration (Peak), Velocity (Peak) and Displacement
(Peak to Peak)

Frequency range from 10 Hz to 1 kHz meets ISO 2954 standards

Zero function

1000 point datalogger with adjustable sample rate

Hold function freezes measured value on display

MAX/MIN function to record máximum and mínimum measured values

Auto Power-Off conserves battery power

Separate vibration sensor with magnetic mount  included

Tachometer Function Features:

  

Photo and Contact Tachometer functions

Laser light source with long measuring distance, up to 1.5 meters (4.9 feet)

Wide measurement range from 0.5 to 100,000 RPM

0.1 RPM resolution ,<1000 RPM, 1 RPM resolution 

1000 RPM

Memory function with recall saved MAX, Min and Last Reading values

Microprocessor with crystal time base provides 0.05% accuracy

General Features: 

Large LCD display

Low Battery indicator

High Performance microprocessor based circuitry

Compact Heavy Duty housing

Hard Carrying case

www.bigfoottrade.kz

Содержание 461880













Отзывы: