![background image](http://html1.mh-extra.com/html/extech-instruments/365535/365535_user-manual_2453895002.webp)
365535-en-GB_V1.2 1/15
Instructions
Introduction
You are about to enjoy an advanced Cumulative and Lap memory professional digital quartz stopwatch
with advanced timing features.
General Features
-4 buttons operation
-Large LCD display with contrast adjustment
-12/24 hour display
-Normal time and chime
-Daily alarm
-Full 1/100 second chronograph with working range from 0 to 19 hr. 59 min. 59.99 seconds with 500 memory
records of split and lap time.
-Recall function for recorded split and lap times
-Count-Down timer with working range from 0 to 1 9hr. 59min. 59.9 seconds
-Three operating modes (Countdown Repeat, Countdown Stop, Countdown then count up) for countdown timer
-Stroke measurement basing on "3"
-Decimal second, minute and hour chronograph
-Segmented run memory
-Beep sound selectable
-Low battery check
-Accuracy of +/- 5 seconds per 24 hours
Important Note:
This stopwatch can store up to 500 split/lap times. When there are 5 free memories remaining,
the “FULL” icon will blink to indicate the nearly full situation. Whenever the storage is full, extra split/lap times will
NOT be stored into memory even if the stopwatch is reset and a new event is started. Extra split/lap times will be
displayed, but not recorded. In order for the stopwatch to record again, the data in memory must be deleted. Please
refer to the “Data Mode” section in this guide to learn how to delete memory