7
365535-en-GB_V1.2 1/15
Whenever the stopwatch stops running, the "STOP" indicator will be ON. Press the button [START/STOP] to start the
stopwatch. As it runs, the current elapsed time is shown on the lower line.
To view the current split / lap time, you can press [LAP/SPLIT].
The number of split/lap times is shown on the upper left corner. The corresponding split and lap times are
displayed on the upper and middle line. Press [LAP/SPLIT] again, the next split/lap time will be shown and the
number of split/lap time is updated.
The stopwatch (Model 500M) can store up to 500 split / lap times. The split/lap times can be stored into the
memory as you press [LAP/SPLIT] to view the current split/lap time. Meanwhile, the lap and split time will be frozen
for 5 seconds. After this 5-second period, the lap and split time will return to normal.
In addition, the fastest lap, the slowest lap, and the averages of all laps will also be recorded. As you press [STOP]
to stop the chronograph, the last lap/split time will also be stored (provided that the last lap/split time is not the
first lap/split time).
When there are 5 free memories left, the icon "FULL" will blink to remind you of the nearly full situation. Whenever
the storage is full, extra split/lap times will not be stored into memory but will still be shown on the display. Any
fastest and slowest laps will not be stored. The memory counter will flash as the extra split/lap times are being
{000}
0:00’00”00
SPLIT
0:00’00”00
LAP
0:03’35”52
RUN
{1} 0:10’43”35
SPLIT
0:10’43”35
LAP
0:10’43”35
RUN
{002} 0:15’10”94
SPLIT
0:04’27”59
LAP
0:15’10”94
RUN
