SHORT POWER SUPPLY CORD INSTRUCTIONS
A short power supply cord is provided to reduce the risk resulting from becoming entangled in,
or tripping over a longer cord. Extension cords may be used if care is exercised in their use.
•
The electrical rating of the extension cord should be at least 16 ampere. An extension
cord of less than 16 ampere could overheat and get damaged.
•
The longer cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over.
BEFORE USE
–
INSTALLATION
•
Unpack the appliance and verify that all accessories that all the accessories including the
ice basket and ice scoop are complete.
•
Place the appliance on a flat and stable surface.
•
Do not turn the ice maker upside down. Doing so could cause the compressor or
refrigerating system to operate incorrectly. Please allow time for the fluids in the
compressor to settle after the ice maker is moved or transported.
•
Before using the ice maker for the first time, please wait for 2 hours after the unit has been
leveled and positioned on an adequate surface, with min.15cm clearance on all sides of
the appliance for uninterrupted ventilation.
•
Clean the appliance by following
the operation of “CLEANING AND MAINTENANCE”
.
CONTROL PANEL
Key (with indicator)
Function
ON/OFF
Start/Stop the appliance
ICE
Standby mode: “ICE” indicator blinks;
Operating Mode: When the item is in use, the
“ICE” indicator lights
up
steadily.
ICE FULL
“ICE FUL
L
” indicator lights
up when the ice basket is full.
ADD WATER
“ADD WATER” indicator lights
up when the water reservoir is empty.
S
The indicator lights up when you select small ice cubes.
L
The indicator lights up when you select large ice cubes.
CLEAN
“
CLEAN
”
indicator lights up when the appliance needs to be cleaned
SELECT
It is possible to select
“
S
”
,
“
L
”
or
“
CLEAN
”
under standby mode. Once
the power is on, it is only possible to select ice cubes sizes :
“
S
”
or
“
L
”
.
•
Ensure that the drain plug at the bottom of the water tank is properly closed.
•
Connect the ice cube maker to the
wall outlet, the “ICE” indicator
will light up.
