FACTORY RESET - LIGHT
Diablo
- Press and hold the function button for approximately 12 seconds, in that time it will multi
flash and then count through 12 flashes, (the rear LED will also flash red/green), release. The rear
LED will flash once, green to confirm.
Bar Lights
– Press and hold the function button until PGM 1 appears on the screen, release.
Without delay Press the function button a further 11 times to enter PGM 12, the screen will then
show RESET for 1 second.
FUNCTION
BUTTON
FUNCTION
BUTTON
REAR LED
TROUBLE SHOOTING
If any connection procedure is struggling the easiest solution is to
factory reset
. This clears any
history/memory to enable a fresh start. However, USER Programs and Remote settings will still
be maintained.
If the
A
button flashes red unexpectedly it may have lost its connection to its light. The solution
is to press the
function button
once on the light, this may reconnect them. If this is unsuccessful,
press the
B
button 4 times to go to sleep. Reconnect after sleep mode as normal.
