TO CHANGE A BATTERY IN THE REMOTE
Carefully remove the four screws, noting how tight they are. Open the case, carefully push out the
existing battery and slide in the new. Ensure the PCB and gasket align with the corner feature.
Screw on the back to a similar tightness to that noted when unscrewing.
To reconnect to the light, press the
A
button.
FACTORY RESET - REMOTE
Remote
- Press the
B
button rapidly 4 times, (flash Red to confirm). Press the
A
button once (one
green flash) and then press and hold the
A
button again for 10 seconds (one green flash to confirm).
After this reset, the Lights and Remote are in Sleep mode. To reconnect them see
To Reconnect
after Sleep Mode
at the beginning of the guide.
x 4
x 1
10 seconds
