OFFICE LINE
29
For machines equipped with an electronic control panel (5 buttons per brewing group), the following
controls are available:
Volumetric control for four different espresso doses.
Time-controlled hot water dosage (on customer’s request).
Automatic filling and level control of the boiler.
Automatic switch off of the heating element at low water level (on customer’s request).
Brewing group auto-cleaning/descaling.
The control panel is by default programmed with 4 standard drink doses (these can be re-programmed
as desired) and one continuous brewing function. The four left-side buttons (1 short espresso – 1
long espresso – 2 short espressos – 2 long espressos) brew the programmed amount and then stop
automatically; the right-side button brews continually until stopped manually by pressing again.
Touchpad
Dosage programming of the drink buttons (Control models only).
PROGRAMMING
1 Long Espresso
1 Short Espresso
2 Short Espresso & Auto-cleaning
Programming &
Continuous Dispensing
2 Long Espressos
Press the Continuous Dispensing button
for 4 seconds, it will begin to flash.
Within 5 seconds, press the button of the dispensing option that you want to program: 1 Short
Espresso, 1 Long Espresso, 2 Short Espressos or 2 Long Espressos. The lights on the selected drink
button and the Continuous button will remain on.
The group will start dispensing coffee. When the desired volume is reached in the cup, press the
selected drink button again to stop dispensing. This volume setting will be saved and the button’s light
will turn off. The Continuous button will remain illuminated.
Repeat this process for all of the dispensing options that you wish to reprogram.
If you only need to reprogram one of the dispensing options, follow the steps above and program just
that option. All of the other dispensing options will remain unchanged.
Important:
Always use a portafilter filled with fresh coffee grounds for every new dose programmed.
