
WS 3000 SAFETY COUPLING
SINGLE-LEVER SYSTEM
The single-lever system, designed by
WINTERHOFF for coupling and
stabilising, provides for swift, effortless
handling:
COUPLING
Place the open ball coupling device on
the grease-free ball. By exerting
downward pressure - in most cases the
drawbar load will be sufficient - the ball
coupling device and the lock will close
automatically.
STABILISING
Continue to push the lever down to the
stop to activate the stabiliser
UNCOUPLING
Slowly pull the coupling lever upwards to
deactivate the stabiliser. Continue to pull
the coupling lever up and, at the same
time, briefly push down the lock to the
stop and remove the open ball coupling
device, in this position, from the ball.
MAINTENANCE WORK
1. Check wheel bolts for firm seating -
after the first run under load conditions,
likewise after each wheel change -
Tighten wheel bolts crosswise using a
torque wrench to the tightening torque
in compliance with the table.
TIGHTENING TORQUES OF WHEEL
BOLTS
2. Check brake play, if necessary readjust
- after the first run under load
conditions, then every 2000-3000
kilometres (1240 to 1860 miles) -
The check is carried out visually on the
stroke (x) of the overrun hitch.
As soon as this reaches more than 50
mm (2 inch) when the brakes are
applied sharply, adjust the wheel
brakes.
Spanner Tightening
widths (mm) Thread
Torques
17 (19)
M 12x1,5
80-90 Nm
19
M 14x1,5
10-120 Nm
24
M 18x1,5
270-280 Nm
Care & Maintenance
Explorer Group 2005 Touring Caravan Handbook
63
Содержание 2005 AVANTE
