Explorer Group 2005 AVANTE, Руководство пользователя

Страница: 15 / 133

14
Connecting Services
WATER
Your caravan will be supplied with either a
Truma Crystal or a Truma Compact water
inlet and submersible water pump (refer
to Equipment Lists section to confirm).
Follow the relevant instructions below to
connect a water supply to your caravan.
Once you have filled your fresh water
container e.g. Aquaroll, from a suitable
water supply, return to the caravan and
stand the water container upright close
enough to the water inlet.
Place a suitable waste water container
e.g. Wastemaster, under the main drain
outlet.
Remove the container's sealer cap and
put in a safe place - not on the ground as
this may contaminate your water supply
the next time you use it, and place the
submersible pump into the fresh water
container, ensuring it is fully submerged
before operating the system.
For information on using a waterline with
an onboard tank see index.
WATER PUMP CONNECTION
RAISE THE LID AND CLEAN BOTH THE
WATER SOCKET AND THE PLUG OF
THE PUMP ASSEMBLY.
Align the plug and push the pump
assembly into the socket. This makes
both the water and electric connections.
Turn the top security clip anti-clockwise
and the bottom security clip clockwise to
lock the plug into place.
The pump system has been designed so
that it can not be fitted incorrectly.
Prior to operation of the water heater,
ensure water is flowing from the hot tap.
Finally put the 'pump' switch on the
control panel to 'on' and turn the cold tap
on until water flows.