12
Parts / Hardware Required:
• Side Shelf (Part #4) x1
• Gas Cylinder Hook (Part #5) x1
• (Hardware A) x4
Installation:
• Loosen the pre-assembly 2
screws with 0.2 inch of thread
exposed
• Hang Side Shelf (Part #4) on 2
screws (Hardware A). Tighten
preinstalled screws.
• Insert 2 screws (Hardware A) to
mount Gas Cylinder Hook (Part
#5)
Parts / Hardware Required:
• Small Bar (Part #12) x1
• (Hardware D) x1
Installation:
• Snap Small Bar (Part #12) at
right side.
• Thread thumb screw
(Hardware D) at left side.