37
Expert Electronics
2017
8.3.3. Waterfall tab
On the Waterfall tab you can see the receiver’s waterfall settings.
Level mode - waterfall bright menu.
Choose the bright mode from the
list: Automatic, Synchronous:
Automatic mode depends on
air signals and set offset in the
settings below.
Synchronous mode depends
on the set limits of the spectrum
amplitude.
Offset top - offset input box by the
top dB level relatively to signals level. Set the offset in the Offset top box to determine the
maximum brightness relatively to the max signals' levels.
Offset bottom - offset input box by the bottom dB level relatively to signals level. Set the
offset in the Offset bottom box to determine the minimum brightness relatively to the min
signals' levels.
Render mode - waterfall render mode menu: Rainbow, Monochrome, Custom. Choose the
required color render of the waterfall, depending on your choice or tasks. In the Custom
mode you have three color presets: 1,2,3 and User adjustable mode.
In the User preset there are 6 color markers at maximum. Double click of the left mouse
button on the color marker opens the color menu, double click of the right mouse button on
the color marker delete it. Double click of the left mouse button on the empty space adds the
color marker.
Remove flicker - checkbox to remove the waterfall flickers. Set the Remove flicker checkbox
to get rid of the texture flickers in the waterfall. Also it slightly clears the waterfall from air
noises.
Rate - waterfall movement speed slider. Set the Rate slider according to the required
waterfall movement speed
.
