Expert Electronics ColibriDDC Скачать руководство пользователя страница 59

Страница: 59 / 69

ColibriDDC User Manual

ExpertSDR2 SOFTWARE DESCRIPTION

3.3.11 TCI menu

In the TCI menu, you can select a port for TCI connection of ExpertSDR2 with a third-party

software, with TCI support, and set the Enable checkbox.

TCI - Transceiver Control Interface was developed by Expert Electronics company, for simple

and still advanced connection between the ExpertSDR2 and third-party software. TCI has all

required control commands similar to CAT system, but even more, it can transfer IQ-streams

from the ExpertSDR2 to clients (third-party software such as signal Skimmers, etc) via local

network and the Internet, CW macroses and Audio In/Out streams for digital modes (will be

added soon). TCI is the universal multi-client interface (you can connect it to Loggers,

Skimmers, PAs, Antenna switches etc. at the same time).

https://github.com/maksimus1210/TCI

- link to the list of files with the description of the interface

in English and Russian and source code of the demo-client software with TCI support.

3.3.12 Spot settings menu

In the Spot set t ings menu, you can adjust spot settings you receive from CW Skimmer and

telnet clusters.

Содержание ColibriDDC






































































Результаты поиска

Содержание ColibriDDC

Отзывы:

Бренды по названию

Популярные бренды

Expert Electronics ColibriDDC, Руководство пользователя

Результаты поиска

Содержание ColibriDDC

Отзывы:

Бренды по названию

Популярные бренды