Expert Electronics ColibriDDC Скачать руководство пользователя страница 43

Страница: 43 / 69

ColibriDDC User Manual

ExpertSDR2 SOFTWARE DESCRIPTION

Updat e period - Spectrum scope update period.

Set the required specter's graph update period. The bigger the number, the more FPS on the

spectrum scope, along with the higher processor load.

Render mode - Spectrum render mode: lines, gradient.

Set the required specter render mode.

Line color - Spectrum scope line color.

Select the required line color from the palette.

Fill color - Fill color of the spectrum scope lower area.

Select the required fill color from the palette.

Fill t ransparency - Transparency slider for the spectrum scope lower area filling.

Set the required filling transparency level.

Show bands - Show amateur bands borders.

Set the Show bands checkbox to show amateur bands borders at the top of the spectrum

scope (blue line).

Save limit s f or each band - Save spectrum scope amplitude limits for each band.

Set the Save limit s f or each band checkbox to enable the software to save set spectrum

scope limits for each band.

Save zoom f or each band - Save spectrum scope zoom settings for each band.

Set the Save zoom f or each band checkbox to enable the software to save spectrum

scope zoom settings for each band.

Zoom cent er f ollows VFOA - Zoom center marker locked on the VFOA position on the

spectrum scope.

Set the Zoom cent er f ollows VFOA checkbox to enable the zoom center marker lock on

the VFOA position.

Animat ion - Spectrum scope animation while transitioning between bands.

Set the Animat ion checkbox to enable animation.

Show cursor inf o - Show frequency and dB level of the cursor position.

Set the Show cursor inf o checkbox to enable info display near the cursor on the spectrum

scope.

Show t he dif f erence bet ween VFOA and VFOB - Show the difference between VFOA

and VFOB.

Set the Show t he dif f erence bet ween VFOA and VFOB checkbox to display the

difference between VFOA and VFOB near the cursor.

Aut o hide cursor - Automatically hide the cursor from the spectrum scope.

Set the Aut o hide cursor checkbox to let the cursor disappear after idle 2 seconds.

Содержание ColibriDDC






































































Результаты поиска

Содержание ColibriDDC

Отзывы:

Бренды по названию

Популярные бренды

Expert Electronics ColibriDDC, Руководство пользователя

Результаты поиска

Содержание ColibriDDC

Отзывы:

Бренды по названию

Популярные бренды