Copyright © 2006
Operation Manual
57
Marquee WEB Pages
VARIABLE COLOR SETTINGS
This configuration page is used for configuring the use of variable color changes for the Marquee.
Variable color is configured based on the value of a given variable data register. Each of the ten
variable data registers can be configured so as the value changes the color that the variable is
displayed in. Also the text of a message can change color based on this value. Please refer to EDIT
MESSAGES page for details on how to configure the message to change colors based on a variable.
VALUE
This column allows the user to specify the values that will dictate a color change. The
DEFAULT COLOR is used if the value of the variable data register is 0 or no setpoints have
been configured.
COLOR
The color column allows the user to specify the color to use for the corresponding variable.
The default color is the color of the data if the variable data has a value of 0 or if no other
values are configured. Each of the other color selection rows correspond to the value
column of the same row.
Example: The user wishes to have the color that VD0 is displayed in change based on the
value of VD0. If the value is less than 100 the color will be green. If the value is greater than
or equal to 100 the value will be red. The user sets the default color for VD0 to be green then
sets the first value row to a value of 100 followed by setting the color to be red.
