Exmark Laser Z XS Скачать руководство пользователя страница 8

Страница: 8 / 56

DANGER

POTENTIAL HAZARD

♦

In certain conditions diesel fuel is

extremely flammable and highly
explosive.

WHAT CAN HAPPEN

♦

A fire or explosion from diesel fuel can

burn you, others, and cause property
damage.

HOW TO AVOID THE HAZARD

♦

DO NOT

smoke while refueling, and stay

away from an open flame or where fumes
may be ignited by spark.

♦

Refuel only outdoors.

♦

Store fuel in an approved container and

keep it out of the reach of children.

♦

Add fuel before starting the engine.

Never

remove the cap of the fuel tank or

add fuel when engine is running or when
the engine is hot.

♦

Never fill the fuel tank so that the fuel

level rises above a level that is 1/2” below
the bottom of the filler neck to allow for
fuel expansion and prevent fuel spillage.

♦

If fuel is spilled,

DO NOT

attempt to start

the engine. Move away from the area of
the spill and avoid creating any source of
ignition until fuel vapors have dissipated.

♦

Do not operate without entire exhaust

system in place and in proper working
condition.

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

Содержание Laser Z XS

























































Результаты поиска

Содержание Laser Z XS

Отзывы:

Похожие инструкции для Laser Z XS

Бренды по названию

Популярные бренды

Exmark Laser Z XS, Руководство оператора

Результаты поиска

Содержание Laser Z XS

Отзывы:

Похожие инструкции для Laser Z XS

Бренды по названию

Популярные бренды