Exmark exmark 30", Руководство оператора

Страница: 34 / 44

Maintenance
1. Disconnect the wire from the spark plug.
2. Drain the fuel from the fuel tank. Refer to
Emptying the Fuel Tank and Cleaning the
Fuel Filter
section.
3. Tip the lawn mower onto its right side.
4. Remove the dirt and grass clippings with a
hardwood scraper. Avoid burrs and sharp edges.
5. Turn the lawn mower upright.
6. Fill the fuel tank.
7. Connect the wire to the spark plug.
Cleaning the Discharge
Tunnel and Plug
Service Interval: Before each use or daily
Always be sure that the discharge tunnel door closes
securely when you release the handle. If the debris
prevents the discharge door from closing securely,
clean the inside of the discharge tunnel and the door
thoroughly.
WARNING
Grass clippings and other objects can be thrown
from an open discharge tunnel. Thrown objects
can cause serious injury or kill the operator or
bystanders.
Never start or operate the lawn mower unless one
of the following is true:
• Mulch Mode:
• Discharge tunnel plug is locked securely
in the discharge tunnel.
• Side discharge cover is locked in place.
• Discharge tunnel door is closed against
frame.
• Bag Mode:
• Discharge tunnel plug is removed.
• Grass bag is locked in place.
• Discharge tunnel door is closed against
bag.
• Side discharge cover is locked in place.
• Side Discharge Mode:
• Discharge tunnel plug is locked securely
in the discharge tunnel.
• Discharge tunnel door is closed against
frame.
• Side discharge deflector is locked in place.
Cleaning Under the Belt
Access Panel
Service Interval: Every 50 hours
1. Stop the engine and wait for all moving parts to
stop.
2. Disconnect the wire from the spark plug.
3. Remove and retain the belt access panel by
rotating the screws a quarter-turn.
4. Brush out all the debris around the belt area.
5. Reinstall the belt access panel and rotate the
screws a quarter-turn to lock into place.
6. Connect the wire to the spark plug.
Clean Debris From Machine
Service Interval: Before each use or daily
34