EXIT Toys 395238, Руководство пользователя

Страница: 73 / 124

www.jilong.com SFP7-16-GB www.jilong.com SFP7-16-GB
1RWH'XULQJWKHRSHUDWLRQRIWKHVDQG¿OWHU
pump, check the pressure reading of the
manometer.
G e n e r a l l y, w h e n t h e p r e s s u r e o f t h e
UHFRPPHQGHGVDQG¿OWHUSXPSLVOHVVWKDQ
0.2bar (3psi) (green area) , it runs normally.
1RWH<RXPXVWPDNHVXUHWKDWPDLQWHQDQFH
begins only after the sand filter pump is
unplugged. Otherwise serious risks such as
personal injury and even death may occur.
Note: Record the reading of the manometer
GXULQJWKHRSHUDWLRQRIWKHVDQG¿OWHUSXPS
When the manometer shows a pressure
of 0.2bar (3psi) or higher, please clean up
the sand bend or replace the sand. Use
"backwash" and "rinse" functions.
Note: regular rinsing according to use
situation is recommended.
Long-term storage and storage in winter
Using the product in a frozen pool may damage the product and invalidate the
quality warranty. If the product has to be used with antifreeze, propylene glycol
PD\DOVREHXVHG3URS\OHQHJO\FROLVDQRQWR[LFFKHPLFDOXQKDUPIXOWRDQ\SODVWLF
parts. Other types of antifreeze are highly toxic and may be harmful to the product’s
plastic elements.
1.Before discharging the water or repostioning of the pool, make sure the discharge
direction is towards the discharging ditch and away from the home. Review local
regulations for special water treatment requirements.
2.Switch off the product and remove the power plug.
3.After emptying, remove all connected sand filter pumps, corrugated tubes and
¿OWHUKRRGVRQWKHSRROZDOO
4.Unscrew the drain valve (8) in an anticlockwise direction to completely empty
water inside the body. The drain plug is at the bottom of the body.
'U\WKHSDUWVRIWKHVDQG¿OWHUSXPSDQGFRUUXJDWHGWXEHV
6.Lubricate the seal rings and washers in the order below for long-term storage.
7.The best practice for product storage is to dry the parts and motor and replace
them in the original package. To avoid shrinkage or corrosion, do not cover or wrap
the motor with a plastic bag.
3OHDVHVWRUHWKHPRWRUDQGSDUWVLQDGU\SODFHDWƒ)ƒ&aƒ)ƒ&
Location of
control valve
)XQFWLRQV :DWHUÀRZGLUHFWLRQ
)LOWHU 1RUPDO¿OWHULQJWRULQVHWKHSRRO
:DWHUÀRZVWKURXJKWKH¿OWHUEHG
ZKHUHWKHVDQG¿OWHUSXPSOLHV
and then enters the pool
Backwash
5HYHUVHGLUHFWLRQZDWHUÀRZWR
ULQVHWKH¿OWHUEHG
:DWHUÀRZVWKURXJKWKH¿OWHUEHG
ZKHUHWKHVDQG¿OWHUSXPSOLHV
and is then directly discharged
from the drain outlet.
Rinse
7KLVIXQFWLRQLVXVHGIRU¿UVW
startup. Sand in the sand tank
is rinsed and the sand bed after
backwashing is leveled.
:DWHUÀRZVWKURXJKWKH¿OWHUEHG
ZKHUHWKHVDQG¿OWHUSXPSOLHV
and is then directly discharged
from the drain outlet.
Drain
Discharged directly from the drain
outlet, used to lower water level
or discharge water from the pool
Discharged directly from the
GUDLQRXWOHWRIWKHVDQG¿OWHU
pump without passing through
WKH¿OWHUEHG
Recirculation
Circulates pool water without
SDVVLQJWKURXJKWKH¿OWHUEHG
:DWHUÀRZVGLUHFWO\LQWRWKHSRRO
through the control valve of the
VDQG¿OWHUSXPSZLWKRXWSDVVLQJ
WKURXJKWKH¿OWHUEHG
Closed
&ORVHGZDWHUÀRZEHWZHHQWKH
¿OWHUDQGWKHSRRO
/