6
En
gl
is
h
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Troubleshooting guide
The system message
“No Signal” is
displayed.
• Cameras lack power supply.
• Camera and receiver not paired. Refer to
Pairing with
the receiver
section above.
• Distance between the camera and the receiver is
too great.
• The signal between camera and receiver blocked
by walls, furniture or obstacles. Move the receiver to
another place to improve reception.
Weak or wobbly
camera image.
• The signal between camera and receiver blocked
by walls, furniture or obstacles. Move the receiver to
another place to improve reception.
• Another radio signal is on the same frequency.
• Strong electromagnetic interference from nearby air
conditioner, microwave oven, WiFi router, etc.
Dim or overly bright
image at night time.
• For optimum image clarity in the dark, the camera’s
detection zone should be 5–8 m away from
the camera.
The recording function
is not working.
• There is no SD card inserted.
• The SD card is locked.
Motion detection is
not working.
• Check the settings (refer to article 36-4791’s
instruction manual).
Specifications
Camera
Max range
100 m in open terrain
Resolution
640 × 480 (VGA)
Operating temperature
-10 to +50 ºC
Mains adaptor
In 100–240 V AC, 50/60 Hz, 0.18 A
Out 5 V, 1 A
Power consumption
550 mA (max)
Night vision
5–8 m
Size
115 × 60 × 19 mm