background image

GREAT BRITAIN - CUSTOMER SERVICE

  contact number: 020 8247 9300  e-mail: [email protected]  internet: www.clasohlson.co.uk

English

1

2

3

4

Ver

. 20160119

CO

WiFi Repeater

Art.no  38-6814 

Model  WRE6505

Please read the entire instruction manual before using the product and 
then save it for future reference. We reserve the right for any errors in 
text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our 
Customer Services.

Note:

 The repeater can either be used as a range extender 

or

 an access 

point. This quick guide only describes the repeater function. If you wish to 
use the repeater as an access point, read the manual on the included CD 
or visit the manufacturer’s homepage (

www.zyxel.com

) for information.

Buttons and functions

WPS connection 

Connect the repeater to your router/access point 

6.  Open you web browser. Go to: 

http://zyxelsetup/

7.  Write 

admin

 in the “Username” field and 

1234

 in the “Password” field.

8.  Open the list of available networks in the device which you wish to 

connect to the repeater.

9.  Select your network or enter the SSID and password.  

Follow the on-screen instructions to complete the connection.

Connecting to the new network which the repeater  

has created

1.  LAN port for connecting a network cable
2.  [

 

 

] WPS button (WiFi Protected Setup)

3.  [ AP/REPEATER ] Access point / Repeater selector switch
4.  [ l/0 ]  On/off  switch

1.  Set the [ l/0 ] switch (4) on 

the underside of the repeater to 

ON

.

2.  Connect the repeater to 

an electrical socket.

3.  Wait about 1 minute until the green 

LED indicator on the front of 
the repeater comes on.

4.  Activate the WPS function on your 

router or access point.

5.  Hold in the WPS button (2) on 

the receiver for 2 seconds.

6.  Wait about 2 minutes until 

the WPS indicators on the devices 
have stopped flashing (the devices 
are connected).

Connecting a wireless device 

to the repeater 

1.  Press the WPS button (2) on 

the receiver twice in quick 
succession.

2.  Activate the WPS function on  

your device.

3.  The device will now be connected 

to the repeater.

1.  The repeater creates 

a new network which 
uses the original 
network name  
plus the suffix  
“ _2.4GEXT” or  
“ _5GEXT”

2.  Open the list of 

available networks 
in the device that 
you wish to connect 
the repeater to.

3.  Connect to the new network using the same password that you 

used for the original network.

Care and maintenance

•  Use a dry cloth to wipe the repeater clean when needed.
•  The repeater should be unplugged from the wall socket if it is not 

to be used for a long time.

•  If you need to reset the repeater to its default factory settings,  

hold in the WPS button (2) for 5–10 seconds until the LED 
indicator starts to flash.

Responsible disposal

Non-WPS connection

1.  Set the [ l/0 ] switch (4) on 

the underside of the repeater to 

ON

.

2.  Connect the repeater to 

an electrical socket.

3.  Wait about 1 minute until the green 

LED indicator on the front of 
the repeater comes on.

4.  Note the SSID and password of 

your wireless network.

5.  Connect your computer to one 

of the pre-configured router 
networks: SSID: Zyxe_2.4GEXT or 
SSID: Zyxe_5GEXT.

This symbol indicates that this product should not 
be disposed of with general household waste. This 
applies throughout the entire EU. In order to prevent any 
harm to the environment or health hazards caused by 
incorrect waste disposal, the product must be handed 
in for recycling so that the material can be disposed of 
in a responsible manner. When recycling your product, 
take it to your local collection facility or contact the place 
of purchase. They will ensure that the product is 
disposed of in an environmentally sound manner.

Specifications

Power supply 

100–240 V, 50/60 Hz

Transfer rate 

750 Mbit/s

Dual band 

2.4/5 GHz

LAN port
WPS support
IP address 

192.168.1.2

Содержание 38-6814






Отзывы: