EXFO IQS-8120NGE, Руководство пользователя

Страница: 146 / 546

Summary Tabs
132
IQS-8500 Series and IQS-8120NGE/8130NGE
Test Logger
Logger Table
An event is automatically listed in the logger and saved on the hard drive in
case a power failure condition occurs.
The logger is cleared when one of the following conditions is met:

A test case is stopped and restarted.

The test case is cleared.

When pressing .
Events are listed by ID - Date/Time by default. Events can also be sorted by
Data Path
or
Event
by pressing on the corresponding column title.

ID : Indicates the Event number. Events are sequentially numbered.

Date/Time
: Indicates the date and time the Alarm/Error condition has
been detected.

Data Path
: Indicates the origin of the alarm/error. [P1] and [P2] in the
data path represent respectively the Port 1 and Port 2. Port 2 is only
available with IQS-8510B.

Event : Indicates the alarm/error type.

Duration
: Indicates the number of seconds (day:hour:minute:second
format) within which the alarm/error occurred.

Count
: Indicates the number of occurrences of the error.

Rate : Indicates the error rate.
Note:
In the Duration, Count and Rate columns, Pending indicates that the
alarm/error condition persists or was persisting when the test was stopped.