EXFO FTB-7000 Series Скачать руководство пользователя страница 276

Страница: 276 / 339

Analyzing Traces with the Bidirectional Analysis Application

262

FTB-7000 Series

Adding Information to the Test Results

Enter the desired information.

Note:

The information in the

Model

and

Serial number

boxes is provided by the

application and cannot be edited.

Press

Apply

to confirm your changes, then

to return to the main

window.

The information entered is saved and can be viewed or changed at any
time using the same process.

To clear all the information from the Trace Identification window:
1.

Press the

Clear All

button.

Note:

The information appearing in the

Model

and

Serial number

boxes cannot

be deleted.

When the application prompts you, confirm the deletion with

Yes

Press

Apply

to confirm your changes, then

to return to the main

window.

Содержание FTB-7000 Series




















































































































































































































































































































































Результаты поиска

Содержание FTB-7000 Series

Отзывы:

EXFO FTB-7000 Series, Руководство пользователя, Страница: 276 / 339

Результаты поиска

Содержание FTB-7000 Series

Отзывы: