EXFO FTB-7000 Series Скачать руководство пользователя страница 172

Страница: 172 / 339

Analyzing Traces and Events

158

FTB-7000 Series

Swapping Traces

Swapping Traces

Note:

This function is available in Advanced mode only.

Since the events table and the trace information are based on the main
trace, you may want to interchange main and reference traces.

When you swap traces, the application will provide a new set of events
corresponding to the new main trace.

To swap traces:
1.

From the button bar, press

Storage

From the

Storage

dialog box, select

Swap Main/Reference

Note:

You can change a main trace into a reference trace, and vice versa, even if
only one trace is in the application’s memory.

Содержание FTB-7000 Series




















































































































































































































































































































































Результаты поиска

Содержание FTB-7000 Series

Отзывы:

EXFO FTB-7000 Series, Руководство пользователя, Страница: 172 / 339

Результаты поиска

Содержание FTB-7000 Series

Отзывы: