EXFO FTB-7000 Series Скачать руководство пользователя страница 188

Страница: 188 / 339

Analyzing the Results Manually

174

FTB-7000 Series

Getting Reflectance

Getting Reflectance

Reflectance is the ratio of reflected light to input light.

Note:

If you are testing in Real time, the reflectance value you will get is not
necessarily accurate.

To get reflectance:
1.

From the main window, select the

Measure

tab.

In the

Results

section, press the

Refl.

button. Markers

and

appear on the graph.

Zoom in and position marker

on the linear area

preceding

the event

to be measured. For more information, see

Using Zoom Controls

page 123 and

Using Markers

on page 165.

Position submarker

at the beginning of the linear area

preceding

the

event to be measured.

Position marker

at the

peak

of the reflective event to be measured.

Note:

Using this procedure, you can measure the reflectance of all the events in a
merged reflective fault event.

Note:

For non-reflective events,

∗∗∗∗∗

will be displayed.

Содержание FTB-7000 Series




















































































































































































































































































































































Результаты поиска

Содержание FTB-7000 Series

Отзывы:

EXFO FTB-7000 Series, Руководство пользователя, Страница: 188 / 339

Результаты поиска

Содержание FTB-7000 Series

Отзывы: