EXFO FLS-2600B, Руководство пользователя

Страница: 44 / 157

Setting Sweep Parameters
36
FLS-2600B
Setting the Cycle Options
Setting the Cycle Options
The cycle options allow you to specify settings in both continuous and
stepped sweep modes.
You can set a specific number of cycles for the sweep to perform.
To set the number of cycles:
1.
Press Sweep .
2. Turn the selection dial clockwise until
CYCLES
is displayed.
3. Press ENTER . The Edit marker starts blinking in the bottom left-hand
corner of the display.
4. Turn the selection dial clockwise or counterclockwise to select the
desired number of sweep cycles. You can select a number from
1 to 99. You can also select Continuous cycling by turning the selection
dial counterclockwise until you pass 1. The display will then indicate
Loop .
5. Press ENTER to validate your choice, and Sweep to exit the Sweep
menu.
Edit