EXFO FLS-2600B, Руководство пользователя

Страница: 30 / 157

Setting Standard Parameters
22
FLS-2600B
Adding Items to Lists
Adding Items to Lists
You can add items to the current list of wavelengths.
To add items:
1.
Make sure you are in Wavelength Edition mode (

mode ). To select
the
Wavelength Edition
mode, see
Selecting a Wavelength
on page 19.
2.
Turn the selection dial clockwise or counterclockwise until you reach
the desired wavelength.
3. Press the Add button on the front panel.
To indicate that the new wavelength was saved, a number between
1 and 100, stating the wavelength’s rank in the list, as well as the

ADD
 mention, will appear. If the list is full, the display will indicate
FULL ,
and you will hear a beep. You will need to delete some wavelengths before
adding more to the list.
The new wavelength is always added to the end of the list, regardless of its
value, using the next available list number. This means that your entries will
not be in ascending or descending numerical order if not entered as such.
To create an ascending list of wavelengths, enter your values beginning
with the lowest and finishing with the highest. To create a descending list
of wavelengths, simply enter your values from highest to lowest.
