10
ASSEMBLY
Tip: Only turn the pedals in the direction instructed. The left and right pedals have different
turning directions for installation. The Cranks, Pedals, Pedal Shafts, Pedal Nuts, and Pedal
Straps are marked “R” for Right and “L” for Left.
Step 2
2a.
Installing The Left Pedal Onto The Left Crank:
Remove the
Left Pedal Nut (55).
Insert the
Left Pedal (12)
perfectly straight into the threaded hole in the
Left Crank (16)
. Turn the pedal shaft
by hand in a COUNTER-CLOCKWISE direction until snug. Use the
13
– 15mm Wrench
to fully
tighten the
Left Pedal (12)
. Attach the
Left Pedal Nut (55)
to the protruding shaft in a CLOCKWISE
direction. Use both the
13-15mm Wrench & 17-19mm Wrench
to simultaneously tighten the
Left
Pedal (12)
and the
Left Pedal Nut (55)
. Only tighten in the directions instructed.
2b.
Installing The Right Pedal Onto The Right Crank:
Remove the
Right Pedal Nut (56)
Insert
the
Right Pedal (11)
perfectly straight into the threaded hole in the
Right Crank (15)
. Turn the
pedal shaft by hand in a CLOCKWISE direction until snug. Use the
13
– 15mm Wrench
to fully
tighten the
Right Pedal (11)
. Attach the
Right Pedal Nut (56)
to the protruding shaft in a
COUNTER-CLOCKWISE direction. Use both the
13-15mm Wrench & 17-19mm Wrench
to
simultaneously tighten the
Right Pedal (11)
and the
Right Pedal Nut (56)
. Only tighten in the
directions instructed.
IMPORTANT:
Ensure that the Right Pedal
(11) matches up with the
Right Crank (15) and the Left
Pedal (12)
matches up with the Left
Crank (16). If reversed, the
cranks may become
damaged or stripped.
TOOL:
13-15mm Wrench
1PC
17-19mm Wrench
1PC
Содержание Momentum Bike
Страница 5: ...3 LABEL PLACEMENT...
Страница 8: ...6 OVERVIEW DRAWING...
Страница 10: ...8 HARDWARE PACK...
