9
ASSEMBLY
STEP 1
1a. Front Stabilizer Installation:
Lift up the front of the
Main Frame (1)
, and attach the
Front
Stabilizer (2)
onto the front bracket of the
Main Frame (1)
with two
Hex Bolts (13)
, two
Spring
Washers (52)
and two
Flat Washers (14).
Use the
6mm Allen Wrench with Phillips Screwdriver
to tighten the
Hex Bolts (13)
until they are firm and secure.
1b. Rear Stabilizer Installation:
Lift up the rear of the
Main Frame (1)
, and attach the
Rear
Stabilizer (3)
onto the rear bracket of the
Main Frame (1)
with two
Hex Bolts (13)
, two
Spring
Washers (52)
and two
Flat Washers (14).
Use the
6mm Allen Wrench with Phillips Screwdriver
to tighten the
Hex Bolts (13)
until they are firm and secure.
HARDWARE PACK:
(14) Flat Washer
4PCS
(13) Hex Bolt
4PCS
6mm Allen Wrench with
Phillips Screwdriver
1PC
TOOL:
(52) Spring Washer
4PCS
CAUTION: PLEASE REMOVE THE
FLYWHELL HOLDER BEFORE
ASSEMBLY THE BIKE.
Содержание Momentum Bike
Страница 5: ...3 LABEL PLACEMENT...
Страница 8: ...6 OVERVIEW DRAWING...
Страница 10: ...8 HARDWARE PACK...
