TROUBLE SHOOTING
PROBLEM: The
pedals came unscrewed while in use.
SOLUTION:
Reinstall the pedals and if you cannot, contact Customer Service.
PROBLEM:
How to reset the data on display.
SOLUTION:
Hold the Mode Key down for 3-10 Seconds, this will reset the display
(Note: The Odometer will not be reset. To reset odometer, remove the batteries
from the computer (9).
PROBLEM:
High Tension on all settings
SOLUTION:
Remove the Console Cover (69) to verify that the Tension Control
Knob (13) is properly connected to the Tension Cable (15). If not, un-hook the
cables and reinstall the Tension Control Knob (13). (See Diagram Below)
SOLUTION:
Make sure part Clip15A is removed. (See Diagram Below)
SOLUTION:
Turn the tension knob to tension level one, then pull the Tension
Control Knob (13) cable up as high as you can, this will reset the tension.
19
MAINTENANCE
&
TROUBLE
SHOOTING
