12
ASSEMBLY
IMPORTANT:
Make sure the right pedal matches up with the right crank and the left
pedal matches up with the left crank. If matched incorrectly, the cranks
may become damaged or stripped.
IMPORTANT:
Screw the
Right Pedal (8)
into the
Right Crank (24)
in a
CLOCKWISE
direction.
Screw the
Left Pedal (7
) into the
Left Crank (23
) in a
COUNTER-CLOCKWISE
direction.
.
STEP 2
TIP:
The Cranks, Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and “L” for Left.
2A. Instalilng the Pedal Straps:
Remove the
Left Nylon Nut (84)
and
Right Nylon Nut (118)
from the
Left
&
Right Pedals (7,8)
. Install the
Left
&
Right Pedal Straps (7-1, 8-1)
on to the
Left
&
Right Pedals (7, 8)
.
See Figure B
.
2B. Installing the Left Pedal:
Insert the
Left Pedal (7)
into the threaded hole in the
Left Crank
(23)
. Turn the
Left Pedal (7)
by hand in a COUNTER-CLOCKWISE direction until snug. Attach the
Left Nylon Nut (84)
onto the protruding
Left Pedal (7)
in a CLOCKWISE direction.
Simultaneously tighten the
Left Pedal (7)
using the
13-15mm Wrench
by turning it COUNTER-
CLOCKWISE and tighten the
Left Nylon Nut (84)
with the
Wrench 19mm provided
in the
CLOCKWISE
direction.
See Figure C
.
2C. Installing the Right Pedal:
Insert the
Right Pedal (8)
into the threaded hole in the
Right
Crank (24)
.Turn the shaft by hand in a CLOCKWISE direction until snug. Attach the
Right Nylon
Nut (118)
onto the protruding
Right Pedal (8)
in a COUNTER-CLOCKWISE direction.
Simultaneously tighten the
Right Pedal (8)
with the
13-15mm Wrench
in the
CLOCKWISE
direction and
the
Right Nylon Nut (118)
with the
19mm Wrench
with a COUNTER-CLOCKWISE
direction.
TOOLS
13-15mm Wrench 1 PC
19mm Wrench 1 PC
Figure C
Figure B
Содержание EXERWORK 1000
