Exerpeutic EXERWORK 1000, Руководство пользователя

Страница: 28 / 30

26
MAINTENANCE & TROUBLESHOOTING
MAINTENANCE
Cleaning
The bike can be cleaned with a soft cloth and a mild detergent. Do not use abrasives or solvents
on the plastic parts. Be sure to wipe your perspiration off the bike after each use. Be careful to not
get excessive moisture on the console display panel as this may cause an electrical hazard or the
electronics to fail. Keep the bike, specifically the console, out of direct sunlight to prevent screen
damage. Inspect all of the assembly bolts and the pedals on the machine for proper tightness
every week.
Storage
Store the bike in a clean and dry environment away from pets and children.
TROUBLESHOOTING
PROBLEM:
There is no display on the console.
SOLUTION: Check if the batteries are correctly positioned and the battery springs are in proper
contact with the batteries.
SOLUTION: The batteries in the console may be dead. Install new batteries.
PROBLEM:
There is no heart rate reading or it is erratic and inconsistent.
SOLUTION: Make sure that the wire connections for the hand pulse sensors are connected and
connected correctly.
SOLUTION: To ensure the pulse readout is accurate, always hold on to the handlebar grip
sensors with both hands.
SOLUTION: Try to maintain moderate pressure while holding onto the hand pulse sensors. Avoid
gripping the hand pulse sensors too tightly as this may cause your pulse to be read incorrectly.
PROBLEM:
The bike makes a squeaking noise when in use.
SOLUTION: The bolts and nuts may be loose on the bike. Inspect all of the bolts and tighten any
loose bolts and nuts.
SOLUTION: Loosen and then retighten the Seat Adjustment Knobs in case there is build-up on
the threads of the knobs which might cause the squeaky noises.
If you need further assistance,
contact our Customer Service.