background image

3

IMPORTANT SAFETY

PRECAUTIONS

!

This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated 

in sketch A in 

Figure 1.  

Make sure that the product is connected to an outlet having the same configuration as 

the plug.  

No adapter should be used with this product.

This unit must be plugged into a nominal 120-volt 60 hz, which has a grounding.  

.

 Keep hands clear of all moving parts. Never place hands, feet under the treadmill.

Do not use the treadmill on a carpet that is greater than 1/2 inch in height.

.

 Before using the treadmill, check that the running belt is aligned and centered on the treadmill bed and all 

  visible fasteners on the treadmill are sufficiently tightened and secure.

  

         

WARNING:

 

Before beginning any exercise program consult your physician. This is especially 

   important for the persons who are over 35 years old or who have pre-existing health problems.  Read all 

   instructions before using any fitness equipment.  We assume no responsibility for personal injury or property 

   damage sustained by or through the use of this product.  Do not operate this exercise equipment without 

   properly fitted guards,  As the moving parts can present a risk of serious injury to young children.

       

CAUTION:

 Read all instructions carefully before operating this product.  Retain this 

          Owner's Manual for future reference

Figure 1

!

!

Содержание 97670
















Отзывы: