background image

Folding Up the Treadmill

Step A:    

Turn the 

Spring Knob (23

) in a counterclockwise direction and pull it to lift the 

Main Frame (1)

 all the way up until the 

 

    

Spring Knob (23)

 "pops" down into the locked position and then turn the 

Spring Knob (23)

 in clockwise direction to 

 

    secure the treadmill in the folding up position. 

See illustration A

.

Step B:  

  Release both 

Handlebar Knobs (67)

.  Pull the 

Short Knob (63)

 and then push the 

Handlebar (68)

 all the way down 

 

    until the 

Short Knob (63)

 "pops" down into the locked position.  Insert both 

Handlebar Knobs (67)

 back into the 

 

   

 Stabilizer (57)

See illustrations B and B-1

.

Step C:    

The illustration C is the treadmill in the folding up position. 

Setting Down the Treadmill

Turn the 

Spring Knob (23)

 in a counterclockwise direction and pull to set down on the 

Main Frame (1)

 on the floor.  Turn the 

Spring Knob (23) 

in a clockwise direction to secure the treadmill in the setting down position.

Pull the 

Short Knob (63) 

(

as shown in illustration B-1

), and then lift the 

Handlebar (68)

 all the way up until the 

Short Knob (63)

 

"pops" down into the locked position.  Tighten the 

Handlebar (68)

 to the 

Stabilizer (57)

 with two 

Handlebar Knobs (67)

TO PREVENT INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN LIFTING UP OR SETTING DOWN THE DECK. 

A

B

B -1

C

12

FOLDING UP 

AND SETTING DOWN THE TREADMILL

Содержание 97670
















Отзывы: