Exerpeutic 4503, Руководство пользователя

Страница: 23 / 32

21
ASSEMBLING THE INVERSION ANGLE CONTROL STRAP
Attach the Long Nylon Strap (45) to the strap lock on the Short Loop Strap (44) by inserting
the end of the strap up through the bottom of the strap lock. Then loop the Long Nylon Strap (45)
over the Pre-assembled Short Loop Strap (44) and down through the strap lock on the Short
Loop Strap (44) . Now, loop the strap back over itself, and insert back through the strap lock on
the Short Loop Strap (44) , and pull tight to secure. See the illustration above.
ADJUSTING THE INVERSION ANGLE CONTROL STRAP
1. For added safety, a nylon strap has been included to restrict the degree of inversion.
2. This strap can be adjusted to different lengths to allow for a greater or lesser degree of
inversion. The longer the strap, the deeper the inversion.
3. To lengthen the Long Nylon Strap (45) , feed the top end of the Long Nylon Strap (45) into
the strap lock, and pull on the lower end of the strap outwards.
4. To shorten the length, feed the bottom end of the Long Nylon Strap (45) into the strap lock,
and pull on the top end.
THE STRAP
SHORTEN LENGTHEN
OPERATION AND ADJUSTMENTS
45
45
44
45
45 44