39
Administration
w
ireless
B3 can act as your access point, both in ‘ Fi Server mode’ or in
‘Server mode’. Read more about setting up the access point in chapter “B3 as
wireless accesspoint” on page 60.
• Wireless
◦
Enable wireless - Select this box to enable the wireless access point in B3.
◦
Network name (SSID) - This is the name that identifies a particular wireless
network. The default name is your B3s host name. The SSID can be up to
32 characters long.
◦
Password - The password (aka pass phrase) is a set of characters that must
be entered exactly the same in both your B3 and your network clients. En-
ter the password in ASCII characters. The length must be between 8 to 63
for WPA and 5 or 13 characters for WEP.
• Advanced wireless settings
◦
Band - Choose what frequency band to use. 802.11n operates at two fre-
quencies: 5 GHz and 2.4 GHz. Only devices which operate in the same
frequency band can communicate with one another.
◦
Mode - Select which 802.11 mode to operate in. Modes are as follows:
‘Legacy mode (802.11a/g)’ - up to 54 Mbit/s and ‘Mixed mode (802.11n +
802.11a/g)’ - up to 300 Mbit/s.
Содержание B3
