30
31
Release and install cover & seat
1
2
3
Install several electronic bidets in the same area, if you want each remote control to
control the specified electronic bidet, please complete setting as per following steps.
Close both cover and seat
The remote control requires 2 batteries (type 3V CR2032).
When the level light flashes continuously, please replace the batteries in time.
1. Keep pressing the „stop” button and „shift” button of adjust temperature on the remote control at the same time for a
few seconds, then hear the „beep” from the product and meanwhile the indicator light of first steps flicks.
2. Release the „stop” button, but keep pressing the „shift” button.
3. Press the „-” and then press „+” of the flow in order, and then release the „shift”button. At this time, the lighted indica-
tor is the current ID code of product.
4. By pressing „-” or „+” buttons of the flow to change different product ID code with corresponding indicator lights up.
There are 32 ID codes in total. It is on the first code by default and the first step light lights up.
5. Press the „stop” button of knob and then press the „stop” button of remote control, at the same time hear the „be-
ep”from the product, it means the setting success.
1. Non-rechargeable batteries are not to be recharged.
2. Rechargeable batteries are to be removed from the appliance before being charged.
3. Different types of batteries or new and used batteries are not to be mixed.
4. Batteries are to be inserted with the correct polarity.
5. The exhausted batteries are to be removed from the appliance and safely disposed of.
6. If the appliance is to be stored unused for a long period, the batteries should be removed.
7. The supply terminals are not to be short-circuited.
Type:
CR2032
One-ON-One Setting
Replacing the batteries
AND
OR
AND
AND
EN
EN
1
2
1
4
2
5.1
3.1
5.2
3.2
1
3
2
4
