24
25
In the process of Rear or Female washing
Adjusting water temperature
Press the „+”or „-” button on the knob
then the water temperature will be
increase or decrease
OR
Repeatly press the „ Adjust temperature” button
on the remote control until the water temperatu-
re icon is lihgted , then press the „Increase” or
„Decrease” button to adjust water temperature.
OR
Smart mode for the deodorization by default. It is on when the user sits down and it will be off
after one minute when the user leaves.
If there is no operation of washing or drying during being seated, it will be off after 15 minutes.
Fresh Air Control setting
Keep pressing the „+ „ or „-” button
of temperature on the remote
control ,then press the „+” button of
position . Press it again the
deodorization will be on the diferent
mode just as „close” or „smart”.
Open the cover and be
seated
Without working
Pull out the knob and turn
clockwise. The deodorization
will be off. Turn clockwise
again then it will be on.
Smart mode : when two indicator
lights are on
Close mode : when one indicator
light is on
forward
pull
Always on mode for the night light by default
Light setting
Sound setting
Ambient light setting
Power standby setting
Keep pressing the „+ „ or „-” button
of temperature on the remote
control ,then press the „-” button of
position . Press it again the night
light will be on the diferent mode
just as „close”,”always on”,”smart”.
OR
Close mode: when one
indicator light is on
Smart mode: when three indicator
lights are on
Always on mode: when two
indicator lights are on
OR
OR
Close the cover . Pull the knob
and rotate it in the anticlockwise
direction.
The night light will be on the
diferent mode just as „close”,
„always on” , „smart”.
Open the cover and be seated.
Pull out the knob then turn it in the
anticlockwise direction. The sound
is off with a long BEEP. Turn again
and it will be on with a short BEEP.
Close the cover, pull the knob and rotate it in the clockwise direction.
The ambient light will be lighted off. It will be lighted up when rotating
it in the clockwise direction again.
Keep pressing the „+ „ or „-” button of temperature on the remote
control ,then press the „Rear wash” button . The breathing lamp
will be lighted off . It will be lighted up when pressing the „Rear
wash” again.
Keep pressing the middle button of the knob for more than 6 seconds,
it will go into power standby mode. Press again the button for more than
6 seconds to restart it.
forward
pull
pull
The "smart" mode refers that the
night light will light up in a dark
environment and light off in a bright
environment.
The sound is on by default.
There is a BEEP when the
bidet has received commands
or signals
Open the cover and be seated
Without working
Always on by default
Close the cover
backward
pull
EN
EN
Notice
backward
OR
