22
X-Cite
®
120PC Q User Guide
035-00328R rev. 4
11 Additional Functions
11.1 Viewing the Accumulated Lamp Hours
11.1.1 Your X-Cite
®
120PC Q system automatically accumulates the number of hours
that the lamp is on and shows this information on the LED display. The lamp
hours are shown when the unit is in Lamp Hour mode.
11.1.2 Set your X-Cite
®
120PC Q to Lamp Hour Mode by pressing the Mode button until
the four digits are displayed
as “XXXX.” (a flashing decimal point to the right).
This shows the number of accumulated hours on the lamp.
11.2 Locking/ Unlocking the Up/ Down Adjustment Buttons
11.2.1 Your X-Cite
®
120PC Q system allows you to lock or disable the Up/ Down
buttons located on the front display panel. When the system lock has been
engaged, no adjustments to the exposure time or iris opening can be made. This
can help to ensure constant exposures when the X-Cite
®
120PC Q is utilized by
multiple operators.
11.2.2 To Lock the Up/ Down push buttons:
1) Push and hold the Mode button
2) While pressing the Mode button, press the following sequence of buttons:
DOWN - UP - UP
– UP
3)
After 2 seconds the message “
LOC
” will momentarily appear for 2 seconds then
vanish.
11.2.3 To Unlock the Up/ Down push buttons:
1) Push and hold the Mode button
2) While pressing the Mode button, press the following sequence of buttons:
DOWN
– UP – UP – UP
3)
After 2 seconds the message “
ULOC’
will momentarily appear for 2 seconds
then vanish.
Note:
Pressing the
START
/
STOP
button while in Lamp Hour mode will open the
shutter for the pre-set Exposure Time (see Section
