manualshive.com logo in svg

Excalibur CHLOR-A-SOFT, Инструкция по установке и эксплуатации, Страница: 9 / 31

Поделиться
Скачать
Excalibur CHLOR-A-SOFT Скачать руководство пользователя страница 9

Page 9 

General Operation 

 

PLEASE NOTE: 

For complete instructions refer to manual. Hand tighten nuts only. 

GENERAL OPERATION 

When the system is operating 

one of two displays will be 

shown: time of day will be one 
choice, gallons of treated water  

available or days until the next 

regeneration will be the other choice.  

Pressing NEXT  will toggle 

between the two choices. 

 

 

TO SET TIME OF DAY 

In the event of a prolonged  
power outage, time of day  

flashes, indicating that this 

needs to be reset. All other 

information will be stored in  

memory no matter how long 

the power outage, Please 
complete the steps as shown to 

the right. To access this mode, 

press “SET CLOCK”. 

  

1. Accessed by pressing SET   

CLOCK 
2. Adjust hours with UP and 

DOWN arrows. AM/PM 

toggles at 12. 

3. Press NEXT. 

 

 
 

4. Adjust minutes with up 

and down arrows. 

5. Press “NEXT” to complete 

and return to normal 

operation 
 

 
 

ADJUST HARDNESS, 

DAYS BETWEEN 

REGENERATIONS, 

OR TIME OF 

REGENERATION 

For initial set-up or to make 

adjustments, please complete 

the steps as shown to the right. 

Access this mode by pressing  

“NEXT” and “” simultaneously. 

Note:

 Hardness display shows 

“-NA-“ if used as a filter. If 

other displays do not appear 

refer to manual.

  

 

 

 
 

 

 

 

 
 

1. Accessed by pressing 

“SET CLOCK”. 

2. Adjust hardness using 

up and down arrows. 

3.Press “NEXT” 
 

4. Adjust days between 

regenerations using up 

and down arrows. 

5. Press “NEXT” 

6. Adjust time of 
regeneration hours with 

up and down arrows, 

AM/PM toggles at 12. 

7. Press “NEXT” 

8. Adjust time of 

regeneration minutes 
with up and down 

arrows. 

9. Press “NEXT to 

complete and return to 

normal operation. 

Содержание CHLOR-A-SOFT
































Отзывы:

Нет отзывов