20
User Programmable Features
Feature #5 - Ignition Controlled Lock/Unlock
Off (press
LOCK
to
program)
Lock w/ Ignition On (press UNLOCK to program)
Unlock w/ Ignition Off (press TRUNK to program)
Lock And Unlock w/ Ignition (press START to program)
This feature controls the lock/unlock operations when the ignition key is turned on/off�
Feature #1 - Remote Start Run Time
3 Minutes (press LOCK to program)
10 Minutes (press UNLOCK to program)
15 Minutes (press TRUNK to program)
20 Minutes (press START to program)
30 Minutes (press LOCK & UNLOCK to program)
This sets the maximum amount of time that the remote start will keep the engine
running if it is not shut down by other methods�
Feature #3 - Confirmation Chirp Volume
Low (softest) (press LOCK to program)
Medium Low (press UNLOCK to program)
Medium High (press TRUNK to program)
High (loudest) (press START to program)
This feature allows the choice different chirp volume levels, and when programming
it, each selection will be confirmed in the chosen volume making it easy to choose the
most suitable setting�
Feature #2 - Flashing Light Confirmations
Unlock: ON, RS: ON (press LOCK to program)
Unlock: ON, RS: Flash (press UNLOCK to program)
Unlock: Flash, RS: ON (press TRUNK to program)
Unlock: Flash, RS: Flash (press START to program)
This feature affects the parking light confirmations for system unlock & remote start
functions� With the above options, you can select any combination of:
Unlock: Flash -
Flashes twice after unlock
Unlock: ON -
Flashes twice then stays on for 30 seconds after unlock
RS: ON
- Stays on during remote start mode
RS: Flash
- Flashes once every 1�5 seconds during remote start mode
Feature #4 - BROWN Wire Audible Output
Pulsed Horn Low
(press LOCK to program)
Pulsed Horn Medium (press UNLOCK to program)
Pulsed Horn High
(press TRUNK to program)
Steady Siren
(press START to program)
Random
(press LOCK & UNLOCK to program)
This changes the BROWN wire’s audible output when the alarm is triggered� Steady
siren must be selected when using a siren (other horn outputs stay at the Medium
setting)� The random option will pulse the horn in a distinct long and short honk
routine during the alarm trigger condition� The horn honk options will affect all horn
honk outputs used as well as change the BROWN wire’s function� If installer feature
#6 is set to “Horn” the Brown wire will function as a steady siren when “Random” is
selected�
Содержание AL-2075-3DB-L
Страница 28: ...Back Cover Color cover is in a separate file...