Excalibur AL-1660-EDPB, Руководство по эксплуатации

Страница: 17 / 20

installer Programmable Features (cont’d)
Feature #11 - manual Transmission mode
On (press “ lock ” button to program)
Off
(press “
unlock
” button to program)
- DEFAuLT
This feature changes the parameters of the system’s remote start operation to be suitable for
manual transmission-equipped vehicles via a “setup” procedure which must be followed upon exit -
ing the vehicle to ensure the transmission is in neutral�
Feature #10 - Turbo Timer
Off (press “ lock ” button to program) - DEFAuLT
Run 1 minute (press “ unlock ” button to program)
Run 2 minutes (press “ trunk ” button to program)
Run 3 minutes (press “ start ” button to program)
This feature, the operation of which is described on page 7, when turned on
configures the system to automatically keep the engine running briefly after the key is turned
off. This operation is designed specifically for vehicles with turbocharged engines. nOTE: This
feature is dependent on the proper wiring of the neutral safety circuit.
Feature #12 Data Port Protocol
Green: DBi, Black: DBi (press “ lock ” button to program) - DEFAuLT
Green: iData, Black: iData (press “ unlock ” button to program)
Green: DBi, Black: iData
(press “
trunk
” button to program)
Green: iData, Black: DBi (press “ start ” button to program)
This feature determines which data protocol is used on each data port� Choose this based on the
accessory being connected to the port� nOTE: When a BLADE is inserted, this feature auto-
matically switches to the ADS protocol.
Feature #13 - Alarm Functions
On
(press “
lock
” button to program)
- DEFAuLT (AL-1660-EDPB)
Off (press “ unlock ” button to program) - DEFAuLT (RS-360-EDPB)
This feature converts the system into a strictly Keyless Entry/Remote Start System by eliminating
all antitheft alarm-oriented operations and features�
Feature #14 - Pulse ignition On Disarm
On (press “ lock ” button to program)
Off (press “ unlock ” button to program) - DEFAuLT
This feature will pulse the ignition and activate any attached immobilizer bypass module for
vehicles that require the ignition to be turned on to disarm the OEM alarm.
Feature #15 Lock On Prewarn
On (press “ lock ” button to program) - DEFAuLT
Off (press “ unlock ” button to program)
This feature will automatically lock the doors to combat unauthorized entry from lock picking when
the prewarn zone is triggered�
Feature #16 - Starter interrupt Functions
Alarm Only
(press “
lock
” button to program)
Anti-Grind Only (press “ unlock ” button to program) - DEFAuLT (RS-360-EDPB)
Alarm & Anti-Grind (press “ trunk ” button to program) - DEFAuLT (AL-1660-EDPB)
Automatic (press “ start ” button to program)
Alarm Only - The Starter Interrupt is operable whenever the alarm is armed�
Anti-Grind Only -
The Starter Interrupt is operable whenever remote start is on�
Alarm & Anti-Grind - This setting engages starter interrupt when the alarm is armed AND when
the system is in remote start mode� This prevents the starter from grinding if the user accidentally
turns the key to “START” during remote start�
Automatic - This will cause the Starter Interrupt output to automatically engage 90 seconds after
the ignition switch is turned “off”, and after disarming the system�
17