Transmitter Functions (cont’d)
TRunK RELEASE / ChAnnEL 2:
Press the “TRUNK” button for 3
seconds�
•
THE SYSTEM WILL DISARM / UNLOCK AND THE
TRUNK WILL OPEN (IF EQUIPPED)�
REmOTE START:
Press and release the “START” button twice
within 5 seconds� (see user feature #8 for additional options)
•
THE PARKING LIGHTS WILL FLASH ONCE AND THE
STATUS LIGHT WILL FLASH RAPIDLY�
•
THE SYSTEM WILL TURN ON THE IGNITIONS AND
PROCEED TO START THE ENGINE�
•
ONCE THE ENGINE IS RUNNING, THE PARKING
LIGHTS WILL TURN ON AND STAY ON AND THE STATUS
LIGHTS WILL FLASH SLOWLY�
•
If the engine stalls, the system will make up to 3 more attempts�
•
Each time you park, set the climate controls as desired when you use the remote start� The
engine will run for the preset run time (see user feature #1)�
•
Run Time Extender
: Press the “START” button one time during remote start to restart the
engine run timer�
nOTE: This can only be used once per remote start cycle.
•
If you decide not to drive your vehicle, you can turn off the remote start using the same method
to turn it on (Default = press “START” twice in 5 seconds)
nOTE: if remote start activation is programmed for 1 press, the 1st press activates Run
Time Extender so an additional press is required to turn off remote start.
•
Upon entering the vehicle during remote start mode, turn the ignition key to the “ON/RUN” posi-
tion (
nOT START!!
)� When you press the brake pedal, the remote start will turn off allowing the
ignition key to take over�
x2
ChAnnEL 3:
Press and hold the “TRUNK” & “START“ buttons for 3
seconds�
•
YOUR SYSTEM WILL ACTIVATE THE CHANNEL 3
OUTPUT�
4
