EWT VENTILEC, Руководство пользователя

Страница: 12 / 24

FR EN NL
www.ewt-france.com
www.ewt-france.com
12
temperature of between 15°C
and 25°C.
• Never immerse the appliance
in water and never place it on
water or any other liquid. Unplug
the appliance immediately if it
becomes damp or wet.
• Never use the appliance when
you have wet or damp hands.
• Do not use the appliance outdoors
(it is not designed for use in the
open air).
• Do not leave the appliance
switched on without supervision.
• Do not place any objects on top
of the appliance.
• Do not sit on the appliance.
• Do not subject the appliance to
heat (radiator, oven…), to direct
sunlight or dampness.
• Always use the appliance in a
vertical position.
• Be careful of the potential
damage that can be caused by
the appliance’s sharp edges.
• Ensure that furniture, curtains or
other combustible materials are
placed more than one (1) meter
from the appliance.
• Always unplug the appliance
before cleaning it.
• WARNING: Do not cover the
appliance. Do not place any
materials or clothes on the
appliance or impede the
circulation of air around the
appliance.
• DO NOT BLOCK THE
VENTILATION! Regularly check
that the air intakes and outlets
are not obstructed.
• Do not put any objects through
the protective grill (finger, pen,
tool…)
• Never use the appliance if the
protective grills are not fitted in
compliance with the assembly
instructions.
• Do not remove the protective grill
for cleaning.
• Do not place the air intake
close to walls or curtains (1m).
Obstruction of the air flow may
reduce the appliance’s efficiency.
SPECIFICATIONS
Model VENTILEC
Number of speed 3 – Low, Medium, High
Pre-programmed modes Yes – Normal, Natural, Sleep
Oscillation Yes
Tilt adjustement Yes : manual
Timer Yes : 1 – 2 – 4 – 8H
Digital display Yes – LED screen
Remote control Yes
Number of blades 5
Power 50W
Voltage 220 - 240 V~
Frequency 50 HZ
Product dimensions (LxWxH) L45 x W40 x H130
Product weight 7.2kg
ASSEMBLY
Step 1
Firstly, place the latch (1) onto a
level area of floor, and insert it into
the centre of the fan stand (2).
Step 2
Secure by firmly screwing the
L-screw onto the top of the latch
(1).
Step 3
Place the whole of the motor (4-8)
on the top of the fan stand (2) and
screw the clamping nut (3) firmly
into place.
Step 4
Attach the back fan guard (9) to
the motor, lining up the holes in the
guard with the front motor protector
(8).Secure it by firmly tightening the
back fan guard safety nut (12).
Ventilec.indd 12 28/11/18 15:30