FR
EN
NL
www.ewt-france.com
www.ewt-france.com
14
E. Speed control
F. Timer control
G. Ventilation mode control
H. Appliance On/off
I. « Timer » indicator
J. « Ventilation mode » indicator
K. « Speed » indicator
Appliance On/Off (A)
After plugging the appliance in, press the button to switch
the appliance on.
Press it a second time to switch the appliance off.
When you use the appliance for the first time, it will be set
by default to operate in Normal ventilation mode on medium
speed and without use of the timer function.
This will be shown by the indicator lights located on the LED
display screen (17).
When you next use the appliance and as long as you have
not unplugged the electrical cable, the appliance will begin
functioning on medium ventilation speed and will then
switch to the ventilation speed selected the previous time
the appliance was used.
Speed control
Ventilation speed can be adjusted by pressing the button.
Every time you press this button, the speed of the appliance
changes as follows: Slow
Æ
Medium
Æ
Fast. Pressing
the
button while the appliance is set to fast speed will
begin the cycle again starting with low speed.
A light indicator on the LED display screen will indicate the
ventilation speed selected.
Timer control
When the appliance is switched on, the default mode does
not trigger use of the timer.
The timer is activated by pressing the button which can
be set to stop the appliance from operating after: 1H, 2H, 4H
or 8H. The corresponding indicator light on the LED display
screen will light up according to the time selected.
Every time you press the button, the appliance will select
the time in the following order:
1H
Æ
2H
Æ
4H
Æ
8H
Æ
Timer off.
The hours indicated do not accrue.
Ventilation mode control
When you switch the appliance on for the first time, the
ventilation mode will be set to Normal by default.
The ventilation mode can be set by pressing the
button.
Every time you press this button, the appliance will select the
ventilation mode in the following order:
Normal Mode
Æ
Natural Mode
Æ
Night Mode.
When the appliance is set to
Night Mode, press the
button
to return to
Normal Mode.
Normal Mode :
When this mode is activated, the
light indicator will light
up on the LED display screen.
Depending on the speed selected – slow, medium, fast –
ventilation speed will not vary and will continue uninterrupted.
Natural Mode:
When this mode is selected, the light indicator will light up
on the LED display screen.
When this mode is selected on Fast speed, ventilation speed
will alternate randomly between Fast, Medium and Slow
speeds.
When this mode is selected on Medium speed, ventilation
speed will randomly alternate between Fast, Medium and
Slow speeds.
When this mode is selected on Slow speed, ventilation speed
will alternate randomly between Medium and Slow speeds.
Sleep Mode:
When this mode is activated, the
light indicator will light
up on the LED display screen.
Sleep Mode selected on Fast speed:
30 minutes on Fast speed in Natural mode
Æ
30 minutes
on Medium speed in Natural mode
Æ
Slow speed in Natural
mode
Sleep Mode selected on Medium speed:
30 minutes on Medium speed in Natural Mode
Æ
Slow speed
in Natural mode
Sleep Mode selected on Slow speed:
Slow speed in Natural mode
TELECOMMANDE
A. Mise en marche / à l’arrêt de l’appareil
B. Contrôle de la minuterie
C. Contrôle de la vitesse de ventilation
D. Contrôle du mode de ventilation
OPEN
PUSH
1. When inserting or removing the battery, please consult the
diagram below. Ensure that the battery is correctly inserted
with regard to its positive and negative symbols.
2. Remove the protective cover from the battery compartment
on your remote control and place the 3V CR2032 battery
inside the compartment.
3. When using the remote control, always point it towards
the sensor on the appliance. Any obstacles in the way may
prevent the remote control from functioning correctly
Ventilec.indd 14
28/11/18 15:30
