EWS OS 3030, Инструкция по эксплуатации

Страница: 31 / 47

OS3030 Changing and Scanning the Basic Values
7. Output function parameters, 8. Activating the buzzer
28
Activation of alarm signal 2
Other events which
should trigger off the
alarm relay.
Press INFO to see the meaning of the abbreviation in plain text.
LP = Low-pressure CO = Concentrate control
ST = Stop signal is active EP = Exceeded pressure control
Activation of alarm signal 3
Other events which
should trigger off the
alarm relay.
Press INFO to see the meaning of the abbreviation in plain text.
PF = Power failure MT = Maintenance required
EX = External switch PS = Motor circuit-breaker has been activated
8. Activation of the buzzer
Buzzer
Activation of the buzzer 1
Warning: You can only
select the options for
which limits have been
set, an input function
selected or appropriate input functions chosen in the previous programming
steps. (Except for the motor circuit-breaker selection; this is always dis-
played).
In this and in the subsequent two steps, program the events which should
trigger off the buzzer.
Press INFO to see the meaning of the abbreviation in plain text.
MI = Value < min. conductivity limit EM = Tank is empty
MA = Value > max. conductivity limit FU = Tank is full
Activation of the buzzer 2
Other events which
should trigger off the
buzzer.
Press INFO to see the meaning of the abbreviation in plain text.
LP = Low-pressure CO = Concentrate control
ST = Stop signal is active EP = Exceeded pressure control
Activation of the buzzer 3
Other events which
should trigger off the
buzzer.
Press INFO to see the meaning of the abbreviation in plain text.
PF = Power failure MT = Maintenance required
EX = External switch PS = Motor circuit-breaker has been activated
Í ¬ » ° ² ± ò æ é ò ï ð
Ô Ð ¤ Í Ì ó
Í ¬ » ° ² ± ò æ é ò ï ï
Ð Ú ó Ð Í ¤ Û È ó
Í ¬ » ° ² ± ò æ è ò ï
Ó × ¤ Ó ß ¤ Û Ó ó Ú Ë ó
Í ¬ » ° ² ± ò æ è ò î
Ô Ð ¤ Í Ì ó
Í ¬ » ° ² ± ò æ è ò í
Ð Ú ó Ð Í ¤ Û È ó