eWON500™
The Transparent Gateway
ver 1.0
9/11/05
Page 2
User Guide
PURPOSE
You have just received your brand new eWON500™!
ACT’L
produces a complete range of Ethernet/Internet
gateways also known as “Programmable Industrial Routers”
(PIR). See our web site
http://www.ewon.biz
to get further
information about the eWON™ range.
The eWON500™ is a
transparent gateway
between the
serial protocols from the PLCs and their matching Ethernet
protocols.
The eWON500™ allows you to connect any communicating
device in order to achieve management and telecontrol
tasks through Ethernet.
The goal of the current document is to teach you how to
correctly configure the eWON500™ as a
Transparent
Gateway
to address a wide range of various Programmable
Logic Controllers (PLC), from the Ethernet side to the serial
side through the eWON™ interface.
eWON500™ is just out of the box, you have already
powered it ON (12-24VDC) and connected its
Ethernet cable.
• Enter
http://10.0.0.53
in the address bar from your Internet Explorer
(refer to the
eBuddy User Guide
if you need to change the eWON™ IP address and subnet mask)
• Enter
adm
(User Name)/
adm
(Password) then
Enter
You are now navigating on your eWON500™!
Every eWONs™ are shipped with the pre configured IP address
10.0.0.53
and
adm
/
adm
as
User Name
/
Password
.
