Maintenance and care
Replacing the grinding disk
099-003694-EW501
04.05.2017
15
• Disconnect the grinding machine from the mains.
• Draw off the grinding liquid in an appropriate container.
• Disassemble the dust container.
• Remove the screws on the inspection glass frame.
• Remove the inspection glass and inspection glass frame.
• Clean the grinding chamber using clean water.
• Top up the cleaning water in a suitable container and dispose of in accordance with regulations.
• Re-fit the inspection glass and inspection glass frame using the screws.
• Make sure the sealing ring fits tightly between casing and inspection glass.
6.2
Replacing the grinding disk
• Disconnect the grinding machine from the mains.
• Draw off the grinding liquid into an appropriate container.
• Remove the inspection glass and inspection glass frame.
• Remove the Allen screw ( left-hand thread) in the centre of the grinding disk.
• Remove the brass disk.
• Replace the grinding disk.
• Re-fit the brass disk using the Allen screw.
• Re-fit the inspection glass and inspection glass frame.
• Top up the grinding liquid.
• Make sure the sealing ring fits tightly between casing and inspection glass.
