Design and function
Transport and installation
099-003694-EW501
04.05.2017
11
5.1.2.1 Topping up the grinding liquid
Operating without grinding liquid!
The machine is not factory-filled with grinding liquid. The machine must not be operated without
grinding liquid!
• Top up the grinding liquid before commissioning!
Figure 5-1
Item Symbol
Description
0
1
Grinding disk
2
Grease nipple plug
3
Filling hose
4
Inspection glass
5
Indication of correct liquid level
6
Dust container
7
Drain thread
8
Machine table
• Unfasten the locking screw from the drain thread.
• Manually screw the duct collector to the drain thread.
• Remove the lubricating nipple plug from the filling hose.
• Place the grinding liquid container inlet onto the filling hose.
• Refill grinding liquid.
• Observe the indication of the correct liquid level in the inspection window (do not exceed)!
Do not transport the grinder with grinding liquid filled in!
• Drain the grinding liquid into a container that can be tightly closed!
