Design and function
TIG Synergic operating principle
56
099-004854-EW501
19.02.2014
5.9.11.5
Spotmatic
NOTE
This function must be enabled before use, see "Advanced settings" chapter.
In contrast to the spotarc operating mode, the arc ignites not by pressing the torch trigger as is usual, but
by shortly touching the tungsten electrode against the workpiece. The torch trigger is used for process
activation. The process can be activated separately for each spot or permanently (see chapter "Advanced
settings"):
• Separate process activation:
The welding process has to be reactivated for every arc ignition by pressing the torch trigger.
• Permanent process activation:
The welding process is activated by pressing the torch trigger once. The following arc ignitions are
initiated by shortly touching the tungsten electrode against the workpiece.
NOTE
Selection and adjustment are made in the same way as with spotArc operating mode
(see chapter TIG spotArc).
Содержание Tetrix 350
Страница 7: ...Contents Notes on the use of these operating instructions 099 004854 EW501 19 02 2014 7...
Страница 20: ...Machine description Rear view 20 099 004854 EW501 19 02 2014 4 2 Rear view Figure 4 2...
Страница 115: ...Appendix B Overview of EWM branches 099 004854 EW501 19 02 2014 115 11 Appendix B 11 1 Overview of EWM branches...